2/22 Alexandra Place, Murarrie QLD 4172, Australia
Monday to Friday - 9am to 4pm
2/22 Alexandra Place, Murarrie QLD 4172, Australia
Monday to Friday - 9am to 4pm
Post Image
13 Oct, 2026
Posted by Sam
0 comment

Air Con Stopped Working? What to Check Before You Call a Technician

If your air con stopped working completely, no lights, no fan, no response from the remote, it’s easy to assume the worst. Before you book a callout, it’s worth spending five minutes on a few checks that are completely safe for anyone to do themselves. In a lot of cases, the fix is as simple as a tripped switch or a flat battery, not a broken system. We’ve put together the checklist our technicians ask customers to run through over the phone, so you can rule out the easy stuff first.

Is Your Air Con Completely Dead, or Just Not Cooling Properly?

This checklist is specifically for a unit that’s showing no signs of life at all when you try to turn it on. If your system powers on, the fan runs, and the display lights up, but the air coming out isn’t actually cold, that’s a different problem with a different cause. We’ve covered that one separately in Why Is My Aircon Not Blowing Cold Air?, and if you’re noticing odd noises, water pooling, or weaker airflow over time rather than a sudden total shutdown, our guide to 5 signs your air conditioning system needs repair is the better starting point. If nothing happens at all, keep reading.

Air Con Stopped Working? Start With the Switchboard

The single most common reason an air con looks completely dead is a tripped breaker or safety switch at the switchboard, not a fault in the unit itself. Brisbane’s storm season puts a lot of strain on home electrical circuits between November and March, and a power surge during a storm is often enough to trip the circuit protecting your AC, even if nothing else in the house seems affected.

Open the switchboard and look for a switch sitting in the middle position, or flipped down, instead of fully up with the others. If you find one, switch it fully off, then back on. If it trips again straight away, stop there and don’t keep resetting it, that’s a sign of an actual electrical fault and resetting it repeatedly isn’t safe.

If you’re not sure whether what you’re looking at is a circuit breaker or a safety switch (RCD), it’s worth knowing the difference before you start flicking switches, since they protect against different things. We’ve explained the difference between an RCD and a circuit breaker in plain terms if you want to check what you’re dealing with first.

Check the Thermostat or Remote Settings Haven’t Changed

If the switchboard looks fine, the next step is confirming nothing has changed on the controls themselves. A timer or sleep function left on from the night before can hold the unit in an “off” state until its scheduled time, which looks identical to a dead system from the outside. Someone in the house switching the mode to “Fan Only” or straight to “Off” is just as common, especially in households with more than one remote floating around.

If you’ve got a ducted system running off a wall-mounted controller rather than a handheld remote, check the schedule hasn’t been set to “off” for that time of day, and that the mode hasn’t been bumped off Cool or Auto. Because that controller is usually the only visible sign the ducted system is even connected to power, it’s an easy thing to overlook.

Check (or Swap) the Remote Batteries

Weak batteries are a classic cause of a system that seems totally unresponsive. A remote can have just enough charge left to light up its own screen but not enough to send a strong infrared signal to the unit, so it looks like the AC is ignoring you when really the message never arrived.

Swap the batteries even if the display still shows numbers, then point the remote directly at the receiver on the indoor unit from a few metres away with a clear line of sight, no furniture or doors in between. If it responds now, that was the whole problem.

Check the Isolator Switch Near the Outdoor Unit

Every outdoor condenser is required to have its own isolator switch nearby, a small weatherproof switch mounted on or near an exterior wall close to the unit. It exists so a technician can safely cut power to that specific unit during servicing, without having to go near the switchboard. The downside is that it’s just as easy for someone else to knock it off by accident, whether that’s a gardener brushing past it with a mower or whipper snipper, a pressure washer being used nearby, or pest control treatment around the exterior of the house.

Find the isolator switch and check it’s firmly in the “on” position, not just resting close to it. On some older installations it needs a firm, deliberate push rather than a light flick to seat properly, so don’t rule it out from a quick glance.

Still Nothing? Here’s What to Do Next

If you’ve worked through the switchboard, the thermostat or remote settings, the batteries, and the isolator switch and the unit is still showing no response at all, the fault is inside the system itself. At that point, it’s not a DIY job, and that’s by design rather than an overly cautious warning. Anyone working on the refrigerant circuit or internal components of an air conditioner in Australia needs to hold a Refrigerant Handling Licence through the Australian Refrigeration Council, which is exactly why these checks stop at switches and never involve opening the unit.

This is also where it helps that our technicians are licensed electricians as well as air conditioning specialists, not just one or the other. A dead unit can sometimes come down to a wiring fault rather than the AC itself, and being able to check both in the one visit saves a second callout and a second invoice. We’ve been doing this across Brisbane, the Sunshine Coast, and the Gold Coast for more than 25 years as a family-run business, and it’s part of why we’ve built up more than 90 five-star reviews from people who had exactly this problem.

Common Questions

Why isn’t my air con turning on at all?

Most of the time it’s one of a handful of simple causes: a tripped breaker or safety switch at the switchboard, a remote that’s lost power or signal, or the isolator switch near the outdoor unit being knocked off. Running through those checks takes a few minutes and resolves the problem more often than people expect, before any call-out is needed.

Can a fuse stop my air con from working?

Yes. If a circuit overloads or a fault develops, the breaker or safety switch protecting that circuit trips and cuts power to the air con, which looks and feels exactly like the unit has simply died. Resetting it at the switchboard fixes it if it was a one-off trip, but if it trips again immediately, stop and call a licensed technician instead of resetting it repeatedly.

What should I do if the AC remote isn’t working?

Start with fresh batteries, even if the remote’s display still lights up, since a weak battery can run the screen without having enough charge to send a usable signal. Then point the remote directly at the receiver on the indoor unit, within a few metres and with nothing blocking the line of sight.

What causes a ducted air con to stop working?

Ducted systems respond to the same basic checks as a split system: the breaker at the switchboard, the isolator switch near the outdoor condenser, and the wall-mounted thermostat’s schedule or mode setting. Because the indoor unit is usually hidden in the roof space, a tripped isolator or breaker is easy to miss until you go and check it specifically.

How do I fix my aircon not turning on?

Work through the checks in order: the switchboard breaker, the thermostat or remote settings, the remote batteries, then the isolator switch near the outdoor unit. If you’ve gone through all four and it’s still not responding, the fault is inside the unit and needs a licensed technician rather than a DIY fix.

Conclusion

An air con that’s stopped working completely feels like a bigger problem than it usually is. Before you assume the system has failed, the switchboard, the remote or thermostat settings, the batteries, and the isolator switch near the outdoor unit are all safe for any homeowner to check in a few minutes, and between them they explain most “dead” units we get called out to.

If you’ve been through the checklist and it’s still not responding, it’s time to bring in a technician rather than guessing further. Get in touch with Lux Air Services and we’ll get someone out to diagnose and fix it properly, backed by more than 25 years of AC and electrical experience across Brisbane, the Sunshine Coast, and the Gold Coast.

Recent Comments

No comments to show.

Archive

November 2026
M T W T F S S
 1
2345678
9101112131415
16171819202122
23242526272829
30  

Recent Posts

Air Conditioner Power-saving Tips | Lux Air Services
25 Nov, 2022

Air Conditioner Power-Saving Tips

A cooling system can keep you comfortable as the mercury and humidity

Ceiling Fan With Light Installation | Lux Air Services
30 Jan, 2023

Ceiling Fan with Light Installation

Ceiling fans and lights are two essential things in our homes that com

Google Rating
5.0
Based on 361 reviews
×
js_loader
Call Now ButtonClick to Call Now!