2/22 Alexandra Place, Murarrie QLD 4172, Australia
1300 417 397
Monday to Friday - 9am to 4pm
2/22 Alexandra Place, Murarrie QLD 4172, Australia
Monday to Friday - 9am to 4pm
1300 417 397
Appointment
Post Image
25 Nov, 2022
Posted by Sam
0 comment

Air Conditioner Power-Saving Tips

A cooling system can keep you comfortable as the mercury and humidity rise. Are there ways to minimise energy wastage, stay cool during hot summer days, and keep electricity bills in check? Let’s find out in the article below.

One of the biggest energy consumers in your home is your air conditioner. Seeing substantial utility bills is normal if you use them regularly.

Even if you run your AC unit daily, you don’t have to adjust to high electricity bills because you can lower them. Here are some tips for reducing AC energy consumption.

Ways to Save Power

Correct Installation

Air conditioners consume more energy, so this method is the easiest way to reduce power bills. Incorrect installation will increase your monthly electricity bill while reducing your AC’s efficiency and durability.

Although it’s often more affordable to have a local handyman install new appliances, it’s usually best to go with a trained technician. This way, you can be sure the installation will be done correctly. In worse cases, an incorrect installation will void the warranty.

Maintain your Cooling System

During summer, clean or replace your air conditioner’s filters every month or two. A constant use of the air conditioner, dusty conditions, or homes that have fur-bearing pets may require more frequent maintenance of the filters.

Regular Maintenance & Service

Air conditioners, like all appliances, require regular maintenance. You should always have your air conditioner serviced, even if they are not used regularly throughout the year. Thus, dust or other particles may damage the machine. To prevent problems with your air conditioner in the summer, you should always service it before the season starts.

Choose the Right Temperature.

Never set the AC to the minimum temperature. According to the Bureau of Energy Efficiency, human bodies thrive at a temperature of 24. As a result, it is better to set the AC temperature at 24 degrees.

You must use a Timer to Avoid Overusing it.

Remember to use the timer on your air conditioner to help save energy! Before going to bed or any other time, setting a timer for 2-3 hours is a good idea. After a certain period, a timer turns off the AC. Using the air conditioner less often reduces overuse and significantly lowers the electricity bill.

Choose the Right Energy Efficient Star Rated AC

The star rating of an air conditioner provides information about its cooling efficiency. With this star rating, BEE (Bureau of Energy Efficiency) emphasizes energy efficiency. An air conditioner with five stars will cool your room more efficiently than one with one or two stars.

Save Energy with Intelligent Temperature Control.

If you’re looking to save even more on your energy bill, consider investing in a thermostat with a built-in timer. This way, you can set the temperature and hours it will operate, and not have to worry about it. Automating your thermostat is the wise way to go!

Clean your AC Filters Regularly

As our air conditioners age, their filters collect dust and debris, restricting airflow. As a result, your AC unit will use more energy to keep your home cool when airflow is interrupted. Make sure your air filters aren’t clogged before it’s too late. Keep your unit’s air flowing smoothly by cleaning and changing them every 30 to 90 days.

Save on your Energy Bill all year long.

Ensure that your air conditioner is checked annually by a professional. If your AC is leaking refrigerant, has a malfunctioning compressor, or has a low refrigerant level, the power consumption will spike, and the cooling capacity will decrease. Therefore, you should have it checked at least once a year. It will ensure that your AC lasts long and performs at its best.

Frequently Asked Questions

Summer air conditioners in Australia should be set at 23°C – 24°C for maximum comfort or 25°C – 27°C for maximum energy efficiency.
The temperature setting for reverse cycle heating in the winter should be between 18°C and 20°C. Your state and region will determine the ideal setting.

Recent Comments

No comments to show.

Archive

August 2026
M T W T F S S
 12
3456789
10111213141516
17181920212223
24252627282930
31  

Recent Posts

An Electrician Brisbane in a "LUX AIR" shirt and tool belt stands on a ladder, servicing a wall-mounted air conditioning unit in a bright room with a window, lamp, and small table.
22 Jul, 2026

Water Leaking AC? Common Causes & When to Call a Technician

Finding a puddle under your indoor unit is never a welcome surprise, a

Read more
Ceiling Fan With Light Installation | Lux Air Services
30 Jan, 2023

Ceiling Fan with Light Installation

Ceiling fans and lights are two essential things in our homes that com

Read more
Google Rating
5.0
Based on 327 reviews
×
js_loader
Call Now ButtonClick to Call Now!